- NZNOG - lists.nznog.org

Re: [nznog] AKL-IX MDR Pop
by Tim Hoffman 26 Nov '15

26 Nov '15

This is true, I did miss the WIX! And Wellington coffee is 100x better then that in the states! Apologies! Still - it is nice to see relatively even amounts of traffic on both Auckland platforms from a resiliency point of view. Perhaps CityLink will now considering lowering prices to the $450/month/10g IX Australia publicly disclose that they charge? Sent from my iPhone > On Nov 26, 2015, at 11:47 AM, Sid Jones <sid.jones(a)citylink.co.nz> wrote: > > FYI: We’ve had some traffic from 1 or 2 providers move from across the APE to the WIX instead. http://nzix.net/wix.html > > There’s a pretty consistent 2 to 2.5 Gbps on the WIX most days – and lets not discount Wellington Tim - as you well know we have by far the best coffee ;) > > From: <nznog-bounces(a)list.waikato.ac.nz> on behalf of Tim Hoffman <tim(a)hoffman.net.nz> > Date: Friday, 27 November 2015 at 8:31 AM > To: Scott Lawson <scott.lawson.nz(a)gmail.com> > Cc: NZNOG Mailing-List <NZNOG(a)list.waikato.ac.nz> > Subject: Re: [nznog] AKL-IX MDR Pop > > Thanks Joe! Great to see that we have another strong option in NZ. > > Interesting also to see now that we have very equal traffic volumes between AKL-IX and APE (even outside the last time this was discussed where we had a major software release coming out of a CDN connected to AKL-IX if I recall correctly). In fact, it looks like AKL-IX is doing just a slight bit more! > > Having two solid IXs in Auckland is the best result for the resiliency of the New Zealand internet - it's great to see that we finally go there! > > Cheers, > Tim > > > >> On Thu, Nov 26, 2015 at 12:11 AM, Scott Lawson <scott.lawson.nz(a)gmail.com> wrote: >> Hi Joe, >> >> Thanks for the update re MDR AKL-IX POP. Keep up the good work! >> >> Do you have any timeline for when the society will be incorporated and you will be moving to paid ports? >> >> Cheers, >> >> Scott. >> >> >>> On 26/11/15 8:44 PM, Joe Wooller wrote: >>> Hey all, >>> >>> Firstly sorry not sorry if this email is off topic. :) >>> >>> I will keep this brief. >>> AKL-IX MDR pop is now live. As we are still waiting for the Society to be Incorporated we will be offering trials for peers interconnecting at MDR. >>> If you would like to hook up please drop me an email and we can get the ball rolling! >>> >>> Cheers >>> Joe >>> >>> _______________________________________________ >>> NZNOG mailing list >>> NZNOG(a)list.waikato.ac.nz >>> http://list.waikato.ac.nz/mailman/listinfo/nznog >> >> _______________________________________________ >> NZNOG mailing list >> NZNOG(a)list.waikato.ac.nz >> http://list.waikato.ac.nz/mailman/listinfo/nznog > > <ape7.png> > <graph_image.php.png>

1 0

AKL-IX MDR Pop
by Joe Wooller 26 Nov '15

26 Nov '15

Hey all, Firstly sorry not sorry if this email is off topic. :) I will keep this brief. AKL-IX MDR pop is now live. As we are still waiting for the Society to be Incorporated we will be offering trials for peers interconnecting at MDR. If you would like to hook up please drop me an email and we can get the ball rolling! Cheers Joe

5 4

UPC lite - does anyone have any info on what kind of service this actually is?
by Mike Taylor 23 Nov '15

23 Nov '15

I'm trying to get some sensible info on exactly what a 'UPC lite' circuit from Chorus is. The info I've managed to glean so far is: - It's an ATM based service (PVC 0/101 from the info I can get from googling.) - I'm told it can only be delivered over a BUBA handover - which means it looks like it might be an aDSL service, restricted to 256k up/down So, putting all this together, it sounds like I'll need an aDSL modem, and treat it just like a 'normal' residential aDSL service, but on PVC 0/101, with PPP <?> and PAP/CHAP? Does anyone have the low down on what this actually is? Thanks in advance, Mike Just so you know, the only two links I could find that say anything useful about UPC lite were: http://www.sparkwholesale.co.nz/n36,3,letter=u.html and http://www.gpforums.co.nz/threads/420210-UPC-lite-connection-%28need-help%29 --

1 1

nzwrt redux?
by Dave Taht 22 Nov '15

22 Nov '15

this is looking quite good: https://www.indiegogo.com/projects/turris-omnia-hi-performance-open-source-… Dave Täht Let's go make home routers and wifi faster! With better software! https://www.gofundme.com/savewifi

10 14

about NZNOG Conference 2016
by Hiroki Kashiwazaki 21 Nov '15

21 Nov '15

Hi, Although I want to attend NZNOG conference 2016, I cannot find any information on NZNOG web site and ML archives. Are there any information?

2 1

UFB 2M upload issues - DEI markings - Juniper
by Dave Mill 19 Nov '15

19 Nov '15

Hi all We have finally fixed our 2M upload issues on Chorus UFB accelerate plans. Skip to the end of this email if you just want an example fix. Along the way we established a couple of incorrect "facts". Some of which I shared with this list. These were: 1) DEI marked packets were being silently dropped on ingress from the Chorus handover 2) Junos 12.3 fixed this issue Recently I deemed that "fact" 1) was wrong and hence "fact" 2) was a bit irrelevant. Here's a crude diagram of our typical set-up: <Chorus handover> <-> [1] <MX80> [2] <-> MPLS/VPLS over Backhaul fibre <-> [3] <PMR MPLS MX> [4] <-> [5] <PMR BNG> Where the numbers in the square brackets are interfaces where I performed some traffic stats. I deemed that DEI=1 marked packets were still showing up at [1] and [3]. They were not showing up at interfaces [4] and [5]. This deemed my above "facts" incorrect. With Juniper CoS you classify on ingress and rewrite on egress. Once we deemed that DEI marked packets were not being dropped at [1] and instead were being dropped between [3] and [4] we can now rewrite these before interface [4]. As we need to rewrite on egress we'll do this at point [2]. In our test case interface [2] is actually xe-1/2/0.388 . And a simple fix for the issue is under the class-of-service section implement: interfaces { xe-1/2/0 { unit 388 { rewrite-rules { ieee-802.1ad { ieee-802.1ad-dei-rewrite; vlan-tag outer; } } } } } rewrite-rules { ieee-802.1ad ieee-802.1ad-dei-rewrite { forwarding-class best-effort { loss-priority low code-point 0000; loss-priority high code-point 0000; } } } The key is to use a ieee-802.1ad rewrite rule rather than a ieee-802.1 rule. The leftmost bit of the 4 bit code-point is the DEI bit. This is all assuming that all traffic is classified as best-effort at interface [1] - if that is not the case then re-write the DEI bit for your other queues as well. You only need to rewrite the outer vlan DEI bit. This is tested on Junos 12.3R8.7 on a MX80. Thanks to all involved in helping fix this - Steve K, Vance and Ivan especially. Cheers Dave

3 4

Cisco Config for Chorus HSNS SHDSL Service?
by Alan Howard 19 Nov '15

19 Nov '15

Hi I have to configure a Cisco 888EA router for a 10Mb HSNS SHDSL service from Chorus, which is not something I have tackled before. Does anyone have a config example suitable for the Chorus service that they can share? I've been Googling for a config but can't find anything specific to Chorus. Any assistance appreciated. Alan.

2 3

1000BaseT SFP modules
by Gareth Fletcher 19 Nov '15

19 Nov '15

Hi team Sooo would anyone happen to be in Auckland and have a couple of spare GLC-T 1G SFP modules that they'd be willing to part with for a month or so? The $nobrand ones we got coded for our Nexus 9Ks don't work in our 3k :( And now in a bit of a pinch... If you do please reply off-list, and please include your beer of preference. Cheers Gareth

1 0

Re: [nznog] nzwrt redux?
by Ray Taylor 18 Nov '15

18 Nov '15

I imagine once we see ufb unbundling then that could slightly change. The big issue is incompatibilities between pon systems and making an ont in a small sfp form factor. Sent from my Samsung Galaxy smartphone.<div> </div><div> </div><div>-------- Original message --------</div><div>From: Tristram Cheer <t(a)uber.co.nz> </div><div>Date: 19/11/2015 13:04 (GMT+12:00) </div><div>To: Daniel Christie <daniel.christie(a)enlighten.co.nz>, Dave Taht <dave.taht(a)gmail.com>, NZNOG(a)list.waikato.ac.nz </div><div>Subject: Re: [nznog] nzwrt redux? </div><div> </div>Under the current UFB structure there is no scope for RSP supplied or end user supplied pluggable optics TRISTRAM CHEER Network Architect - Most problems are the result of previous solutions... E: t(a)uber.co.nz P: 09 438 5472 Ext 803 | M: 022 412 1985 | W: www.uber.co.nz 53 PORT ROAD | PO BOX 5083 | WHANGAREI | NEW ZEALAND -----Original Message----- From: nznog-bounces(a)list.waikato.ac.nz [mailto:nznog-bounces(a)list.waikato.ac.nz] On Behalf Of Daniel Christie Sent: Thursday, 19 November 2015 1:02 p.m. To: Dave Taht <dave.taht(a)gmail.com>; NZNOG(a)list.waikato.ac.nz Subject: Re: [nznog] nzwrt redux? That actually seems really cool, Would the SFP port work in NZ for removing the need of an ONT? Is it something that the fibre companies would allow consumers to do? ---------------------------------------------------------------------- Daniel Christie SYSTEMS ENGINEER/APPLICATION SPECIALIST PHONE +64 7 8536060 | www.enlighten.co.nz -----Original Message----- From: Dave Taht [mailto:dave.taht(a)gmail.com] Sent: Tuesday, 17 November 2015 1:20 AM To: NZNOG(a)list.waikato.ac.nz Subject: [nznog] nzwrt redux? this is looking quite good: https://www.indiegogo.com/projects/turris-omnia-hi-performance-open-source-… Dave Täht Let's go make home routers and wifi faster! With better software! https://www.gofundme.com/savewifi _______________________________________________ NZNOG mailing list NZNOG(a)list.waikato.ac.nz http://list.waikato.ac.nz/mailman/listinfo/nznog _______________________________________________ NZNOG mailing list NZNOG(a)list.waikato.ac.nz http://list.waikato.ac.nz/mailman/listinfo/nznog _______________________________________________ NZNOG mailing list NZNOG(a)list.waikato.ac.nz http://list.waikato.ac.nz/mailman/listinfo/nznog

2 1

Dell R610 P/Supply
by Shaun McGuane 16 Nov '15

16 Nov '15

Hi NZNog, Apologies for being off topic - Trying to tap into the local knowledge :) I am over here at our office and shipped over some servers that had a power supply go bang! Wondered if you guys knew of any local places where I could pick up server spares. In particular Dell R610 717W – Model D717P-S0 Thanks in advance Regards Shaun

2 1