Yes, Cisco IOS has an option to define argentinian signialing as the country to use and i defined it in my configuration.

thanks.

-----Mensaje original-----
De:     Chris Rigby [SMTP:chris.r@staff.ihug.co.nz]
Enviado el:     Lunes 4 de Diciembre de 2000 5:51 PM
Para:   Mendez Mart�n
CC:     nznog@list.waikato.ac.nz
Asunto: RE: problems with as5200

> It is extange, Cisco has say that this is not is a hardware problem, anyway,
> i couldn't put operating this server, some one say me that may be it is a
> particular problems of this aserver with signialling with the E1 (r2
> signialling in Argentina). of my country.
> Anyway, thanks for your comments.

Well I do know for a fact that r2 signaling in argentina is slightly
different than the standard. Lucent have even gone so far as to add the
"argentinian" signaling type as an option in their maxes and tnt's so it
must be enough different to warrant this.

If it keeps going to sleep then it most likely is an issue like this. Have
you checked ciscos site to see if they have an "argentinian" option like
the maxes?

Chris Rigby
Senior Systems Engineer
IHUG - Into the Internet