Wasn���t there some sort of IPv6 bug with the Chorus ALU ONT���s?

I���m pretty sure that got fixed with this weeks mass upgrade of Chorus OLT/ONT���s.��

My understanding is that prior to the upgrade IPv6 was broken for 2d UFB customers and now it���s fixed.

If your OLT/ONT hasn���t been upgraded yet that might be the cause.��

- -

Liam Farr
+64-22-6107884

Sent from my iPhone

On 5/10/2018, at 4:50 PM, Bill Walker <bill@wjw.nz> wrote:

Hi All,

��

I���ve been quite happily running a Cisco router at home on Snap/2degrees, but with the upgrade to UFB its not coping with the throughput.�� I���ve managed to locate a suitably equipped ASA, however I cant get IPv6 going.�� The config I have on the ASA is very similar to that of the router:

��

nterface GigabitEthernet0/7

description 2degrees

nameif EXTERNAL

security-level 0

no ip address

ciscoasa# sh run int gi0/7.10

!

interface GigabitEthernet0/7.10

description 2degrees

vlan 10

nameif 2degrees10

security-level 0

pppoe client vpdn group 2degrees

ip address pppoe setroute

��ipv6 address autoconfig

ipv6 address dhcp

ipv6 enable

ipv6 dhcp client pd 2degrees-v6

��

However, if I remember correctly the IPv6 dhcp assignment happens inside the PPPoE connection once its established. Can anyone confirm that or provide a working config?

��

In case someone wants versions, the ASA is on 9.9.2 (asa992-smp-k8.bin)

��

Thanks,

��

Bill

��

Sent from Mail for Windows 10

��

_______________________________________________
NZNOG mailing list
NZNOG@list.waikato.ac.nz
https://list.waikato.ac.nz/mailman/listinfo/nznog