This is from the version 9 docs MAX Administration Guide B-29 Diag RadIF Description: Displays RADIUS-related messages. Diag RadIF is a powerful diagnostic command, because it displays RADIUS messages that the MAX unit receives and messages that it sends. Output from Diag RadIF, in conjunction with running your RADIUS daemon in diagnostic mode (using the -x option), gives you virtually all the information you need to clarify issues relating to user authentication. You can use this command to validate the IP port that you have configured (or think you have configured), and the username that is being sent by the client. The command is a toggle that alternately enables and disables the diagnostic display. Usage: Enter diag radif at the command prompt. Example: Following are messages you might see for a successful RADIUS authentication: RADIF: authenticating <8:my_name> with PAP RADIF: _radiusRequest: id 41, user name <9:my_name> RADIF: _radiusRequest: challenge len = <0> The RADIUS Daemon IP address and authentication port appear: RADIF: _radiusRequest: socket 5 len 89 ipaddr 01010101 port 65534->1645 RADIF: _radCallback RADIF: _radCallback, buf = B05BBFA0 The response is sent back from RADIUS. In this case, the user my_name has passed authentication. Following is a list of the most common responses: 1 - Authentication Request 2 - Positive Acknowledgment 3 - Rejection 4 - Accounting Request 5 - Accounting Response 7 - Password Change Request 8 - Password Change Positive Acknowledgment 9 - Password Change Rejection 11 - Access Challenge 29 - Password - next code 30 - Password New PIN 31 - Password Terminate Session 32 - Password Expired RADIF: _radCallback, authcode = 2 RADIF: Authentication Ack After authenticating a user, the RADIUS daemon sends the attributes from the user profile to the MAX unit. The unit creates the user�s Connection profile from these attributes, and RadIF displays them. (For a complete list of attribute numbers, see the TAOS RADIUS Guide and Reference.) RADIF: attribute 6, len 6, 00 00 00 02 RADIF: attribute 7, len 6, 00 00 00 01 Diagnostic Parameters and Commands Using diagnostics-related DO commands RADIF: attribute 8, len 6, ff ff ff fe RADIF: attribute 9, len 6, ff ff ff 00 RADIF: attribute 11, len 12, 73 74 64 2e RADIF: attribute 12, len 6, 00 00 05 dc RADIF: attribute 10, len 6, 00 00 00 00 RADIF: attribute 13, len 6, 00 00 00 01 RADIF: attribute 244, len 6, 00 00 11 94 RADIF: attribute 169, len 6, 00 00 11 94 RADIF: attribute 170, len 6, 00 00 00 02 RADIF: attribute 245, len 6, 00 00 00 00 RADIF: attribute 235, len 6, 00 00 00 01 A RADIUS Accounting Start packet is sent to the RADIUS Accounting Server (using port 1646): RADIF: _radiusAcctRequest: id 42, user name <9:my_name> RADIF: _radiusAcctRequest: socket 6 len 82 IP cf9e400b port 1646, ID=42 RADIF: _radCallback RADIF: _radCallback, buf = B05433C0 RADIF: _radProcAcctRsp: user:<9:my_name>, ID=42 On Thu, Sep 06, 2001 at 12:05:59AM -0700, John Lynch wrote:
At 11:56 PM 9/5/2001 +1200, Dean Pemberton wrote:
Hmmm it's getting hazy - but radif sounds familiar. If no one helps you by tommorow then I'll ring some friends still stranded at Lucent for you
na isn't that one, went through just about every rad bla bla I could think of, which is also how I think I got it last time . ...... god old trial and error... but mostly error.
John Lynch System Administrator (string and tape specialist) Wise Net
--------- To unsubscribe from nznog, send email to majordomo(a)list.waikato.ac.nz where the body of your message reads: unsubscribe nznog
To unsubscribe from nznog, send email to majordomo(a)list.waikato.ac.nz where the body of your message reads: unsubscribe nznog