We’ve got quite a few out there, important bits below, remember NAT on inside interface and diaper-list.
One niggle we haven’t solved is the ones we have on Vodafone suffer from the cellular interface going dead after a few days, we’ve had to resort to inserting a cron in the router to kill the Cellular interface daily then bring it back up – I’ve not spent enough time to work out if it’s a Vodafone issue or a Cisco issue, but it doesn’t happen on the ones we have using Telecom SIM’s.
!
chat-script hspa "" "AT!SCACT=1,1" TIMEOUT 60 "OK"
chat-script hspa-R7 "" "AT!SCACT=1,1" TIMEOUT 60 "OK"
!
interface Cellular0
ip address negotiated
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat outside
ip virtual-reassembly in
ip virtual-reassembly out
encapsulation slip
dialer in-band
dialer idle-timeout 0
dialer string hspa
dialer-group 1
async mode interactive
!
ip route 0.0.0.0 0.0.0.0 Cellular0
!
line 3
exec-timeout 0 0
script dialer hspa
modem InOut
no exec
-Scott
On 12/02/14 15:37, "Laurence Bullivant" <laurence@bullivant.co.nz> wrote:
I am hoping in exchange for BEER, someone out there has worked it out.We have just started getting the new routers into stock that use the new cellular modems. Our normal connection scripts don't work any more and we have been unable to find the required connection details for either vodafone or telecom connections.Afternoon,This is a reach out for anyone else using Cisco881g / Cisco887vag routers with 3G backup.
(We have a pending case with TAC but I hope this will be faster).
The content of this message and any attachments may be privileged, confidential or sensitive. Any unauthorised used is prohibited. Views expressed in this message are those of the individual sender, except where stated otherwise with appropriate authority. All pricing provided is valid at the time of writing only and due to factors such as the exchange rate, may change without notice. Sales are made subject to our Terms & Conditions, available on our website or on request.