
The main problem at the moment is a lack of a CPE that properly supports IPv6, my attempts to build custom firmware for BCM63xx modems has been largely thwarted for now by Dynalink/Netcomm's failure to provide proper board definitions in their GPL released source code (it boots, but doesn't identify the board properly) If anyone wants to donate their old ADSL2+ (preferably Broadcom based, working or bricked) modems to the cause, please email me offlist. The resulting firmwares will be made available to all.
I also stopped waiting for a CPE that works, and I wanted something easily/locally available, so I went instead for a TP-Link TL-WR1043ND running OpenWrt as the router and a Draytek Vigor 120 as a modem (it does PPPoA to PPPoE "transaltion") Works like a charm IPv6 and all. PS: I first tried a TD-8840 in half-bridge mode, but that doesn't do IPv6. -- ------------------------------------------------------------------------ Jean-Francois Pirus <jfp(a)clearfield.com> Technical Manager Phone (+64-9) 358 2081 Clearfield Software Ltd Fax (+64-9) 358 2083 1st Floor 8-10 Whitaker Place Mob (+64-21) 640 779 P O Box 3901 Auckland, New Zealand ------------------------------------------------------------------------