It is extange, Cisco has say that this is not is a hardware problem, anyway, i couldn't put operating this server, some one say me that may be it is a particular problems of this aserver with signialling with the E1 (r2 signialling in Argentina). of my country.

Anyway, thanks for your comments.

Mart�n M�ndez
Teconolog�a - PECOM Energia.
Voice:+54-11-4344-6000 Int. 3103
mmendezb@pecom.com.ar

-----Mensaje original-----
De:     Tony Wicks [SMTP:tony.wicks@nz.asiaonline.net]
Enviado el:     Lunes 4 de Diciembre de 2000 5:29 PM
Para:   nznog@list.waikato.ac.nz
Asunto: RE: problems with as5200

I use entirely Cisco access servers with excellent results.

-----Original Message-----
From: owner-nznog@list.waikato.ac.nz
[mailto:owner-nznog@list.waikato.ac.nz]On Behalf Of Chris Rigby
Sent: Tuesday, 5 December 2000 9:24 a.m.
To: Mendez Martin
Cc: 'nznog@list.waikato.ac.nz'
Subject: Re: problems with as5200




> I'm trying to put on an access server cisco as5200 with support 56kbps.
> I probed three IOS version (11-3.9T, 11-3-9A and 12.0.1) with different
> modems (mica) firmwares (2.3.1.0, 2.6.2.0, 2.7.2.0) in differents
> combinations.

1) you do realise this is a _New Zealand_ Network operators group right?

> but the AS works horrible !

2) you've hit the nail on the head. Ditch the crappy Cisco dial in servers
and get some Lucent gear (A Max6000 should do what you want). Cisco should
stick to routers.

Chris Rigby
Senior Systems Engineer
IHUG - Into the Internet

---------
To unsubscribe from nznog, send email to majordomo@list.waikato.ac.nz
where the body of your message reads:
unsubscribe nznog

---------
To unsubscribe from nznog, send email to majordomo@list.waikato.ac.nz
where the body of your message reads:
unsubscribe nznog