[nznog] Re: spark sip trunk config on a cisco isr/cube

Off the top of my head, try putting the number as 91234567 - also your caller id has to be valid depending on trunk settings Otherwise, ask spark- Cisco is an officially supported config (from memory) HTH! Sent from my iPhone

On 4/03/2020, at 18:40, Blair Harrison wrote:

 Hi Folks,

Does anyone have a reference config for Cisco CUBE for connecting to Spark's SIP trunk service? Assume I am missing something simple here as incoming working fine but outgoing gets 404s.

Cheers, Blair

_______________________________________________ NZNOG mailing list -- nznog(a)list.waikato.ac.nz To unsubscribe send an email to nznog-leave(a)list.waikato.ac.nz