For those not subscribed to AusNOG, Skeeve has solved his issue!

On Wed, Sep 17, 2014 at 12:37 PM, Skeeve Stevens��<skeeve+ausnog@eintellegonetworks.com>��wrote:

OK all.. it was a PEBKAC issue... it was the loopback being wrong... and when I was re-resting I had removed the pool from the avpairs for testing.

It is fine now... damnit...��

I need a holiday... off to Brisbane to APNIC I go.

...Skeeve

On Wed, Sep 17, 2014 at 11:36 AM, Skeeve Stevens <skeeve@eintellegonetworks.co.nz> wrote:

Hi all,

I am having trouble with getting a PPPoE session to use a local ip pool via an AVPair.

I am sending the following avpairs to the session from Radius (we're using Smile):

lcp:allow-subinterface=yes
ip:vrf-id=TESTVRF
ip:addr-pool=TESTPOOL
ip:ip-unnumbered=Loopback212

On the router:

ip local pool TESTPOOL 100.64.8.1 100.64.15.254

The attributes are being received in the debug, and the session is ending up in the correct VRF, but there is no IP address being assigned on the local LNS.

Router#show users
...
�� Interface �� User �� Mode �� Idle �� Peer Address
�� Vi2.1 �� testuser@test.com��PPPoE �� - ��

Router#show vrf
...
�� Name �� Default RD �� Protocols �� Interfaces
��TESTVRF�� 65000:305 �� ipv4 �� Lo305
�� Vi2.1
...

Any help to figure out what is going on would be very much appreciated.

Cisco IOS Software, ASR1000 Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 15.4(1)S, RELEASE SOFTWARE (fc2)

...Skeeve

Skeeve Stevens -��eintellego Networks Pty Ltd
skeeve@eintellegonetworks.co.nz��;��www.eintellegonetworks.co.nz
Phone: +612 8014 7398;��Cell +61 (0)414 753 383 ;��skype://skeeve
facebook.com/eintellegonetworks��;��linkedin.com/in/skeeve
twitter.com/theispguy��; blog:��www.theispguy.com

The Experts Who The Experts Call
Juniper - Cisco��- Cloud - Consulting��- IPv4 Brokering

_______________________________________________
NZNOG mailing list
NZNOG@list.waikato.ac.nz
http://list.waikato.ac.nz/mailman/listinfo/nznog