Hi all,
I am having trouble with getting a PPPoE session to use a local ip pool via an AVPair.
I am sending the following avpairs to the session from Radius (we're using Smile):
lcp:allow-subinterface=yes
ip:vrf-id=TESTVRF
ip:addr-pool=TESTPOOL
ip:ip-unnumbered=Loopback212
On the router:
ip local pool TESTPOOL 100.64.8.1 100.64.15.254
The attributes are being received in the debug, and the session is ending up in the correct VRF, but there is no IP address being assigned on the local LNS.
Router#show users
...
�� Interface �� ��User �� �� �� �� �� �� �� Mode �� �� �� �� Idle �� �� Peer Address
Router#show vrf
...
�� Name �� �� �� �� �� �� �� �� �� �� �� �� �� �� Default RD �� �� �� �� �� ��Protocols �� Interfaces
����TESTVRF�� �� �� �� �� �� �� �� ��65000:305 �� �� �� �� �� �� ipv4 �� �� �� ��Lo305
�� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� ��Vi2.1
...
Any help to figure out what is going on would be very much appreciated.
Cisco IOS Software, ASR1000 Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 15.4(1)S, RELEASE SOFTWARE (fc2)
...Skeeve
Skeeve Stevens -��eintellego Networks Pty Ltd
The Experts Who The Experts Call
Juniper - Cisco��- Cloud - Consulting��- IPv4 Brokering