Try http://www.cpm.ru:8100/service/manuals/max6000/max6000/isptele/m6isp.htm Chapter 11 - OSPF routing Have a look at how the Max handles areas and LSA notifications across them -----Original Message----- From: owner-nznog(a)list.waikato.ac.nz [mailto:owner-nznog(a)list.waikato.ac.nz]On Behalf Of Craig Whitmore Sent: Tuesday, 18 September 2001 15:23 To: nznog(a)list.waikato.ac.nz Subject: OSPF Between Cisco and Ascend 6000 Hi there.. I am having trouble getting OSPF between Cisco's and Max6000. The Cisco's work ok with ospf, but the max can see the ospf routes advertised from the other Cisco's, but it cannot send out updates when someone connects to it. Anyone know where a Cisco<->Max OSPF Faq can be found (so I can get it working) Or maybe a Max4000/6000 Config that works from someone else? The Config are below: Cisco: router ospf 14 redistribute connected metric 1 metric-type 1 subnets redistribute static metric-type 1 subnets network x.x.x.x 0.0.0.15 area 14 Ascend: RUNOSPF=Yes Area=0.0.0.14 AreaType=Normal HelloInterval=10 DeadInterval=40 Priority=100 AuthType=None Cost=1 TransmitDelay=1 RestransmitInterval=5 --------- To unsubscribe from nznog, send email to majordomo(a)list.waikato.ac.nz where the body of your message reads: unsubscribe nznog