I hope this, but Cisco only say: probe this version, and after that say probe this another and so on.
It appear like the Cisco engineer (TAC) don�t know really what is happend here.

Thanks!

-----Mensaje original-----
De:     Scott, Arron [SMTP:ascott@cisco.com]
Enviado el:     Lunes 4 de Diciembre de 2000 5:57 PM
Para:   Chris Rigby; Mendez Martin
CC:     'nznog@list.waikato.ac.nz'
Asunto: RE: problems with as5200

Thanks for your opinion Chris, however Cisco, the number 1 manufacturer
of dial servers in the world would be happy to give Martin a hand to
sort this out ;-)

ps. We make more switches than routers now.

Arron Scott
Systems Engineer
Cisco

-----Original Message-----
From: owner-nznog@list.waikato.ac.nz
[mailto:owner-nznog@list.waikato.ac.nz]On Behalf Of Chris Rigby
Sent: Monday, 4 December 2000 12:24 p.m.
To: Mendez Martin
Cc: 'nznog@list.waikato.ac.nz'
Subject: Re: problems with as5200




> I'm trying to put on an access server cisco as5200 with support
56kbps.
> I probed three IOS version (11-3.9T, 11-3-9A and 12.0.1) with
different
> modems (mica) firmwares (2.3.1.0, 2.6.2.0, 2.7.2.0) in differents
> combinations.

1) you do realise this is a _New Zealand_ Network operators group right?

> but the AS works horrible !

2) you've hit the nail on the head. Ditch the crappy Cisco dial in
servers
and get some Lucent gear (A Max6000 should do what you want). Cisco
should
stick to routers.

Chris Rigby
Senior Systems Engineer
IHUG - Into the Internet

---------
To unsubscribe from nznog, send email to majordomo@list.waikato.ac.nz
where the body of your message reads:
unsubscribe nznog