Re: [nznog] Juniper EX-series switches & flash memory

There's a few things to help. 1) request system snapshot slice alternate, as suggested above. 2) turn logging off locally (so hopefully it won't be writing to disk when the power fails) 3) keep a recovery image on the USB inserted into the device 5) use JTAC recommended releases - http://kb.juniper.net/InfoCenter/index?page=content&id=KB21476 4) don't lose power /s On 23 May 2014 15:31, Jed Laundry wrote:

A good gust of wind will cause then to boot from secondary...

request system snapshot slice alternate for victory.

Thanks, Jed.

Sent from a small screen.

On 23/05/2014 2:41 pm, "Sam Russell" wrote:

...

Hi all,

We've acquired a few EX-series switches recently and are a bit unimpressed at how they deal with power outages. Not wanting to trash talk here, just keen to see if anyone else is seeing this problem and ways they're dealing with this, off-list replies appreciated.

Cheers Sam

_______________________________________________ NZNOG mailing list NZNOG(a)list.waikato.ac.nz http://list.waikato.ac.nz/mailman/listinfo/nznog

_______________________________________________ NZNOG mailing list NZNOG(a)list.waikato.ac.nz http://list.waikato.ac.nz/mailman/listinfo/nznog