Absolutely, I hadn't realised the responses to me weren't to the list as well.

The relevant bits of the config for the CIsco 888EA were:

controller SHDSL 0
��mode efm
��dsl-group 0 pairs ��0,1,2,4 efm-bond
!
interface Ethernet0
��ip address x.x.x.x x.x.x.x
��no ip redirects
��no ip unreachables
��no ip proxy-arp
��no shut

Hopefully this is useful for someone in the future.

Cheers
Alan.

On 20 November 2015 at 10:48, Dave Mill <davemill@gmail.com> wrote:
Feel like sharing a config with the list? Will help the next person who's in the same situation a great deal.

Cheers
Dave

On Fri, Nov 20, 2015 at 10:45 AM, Alan Howard <alan@howard.net.nz> wrote:
Much appreciation to everyone who replied, with your assistance I've got the router configured.

Thanks
Alan.

On 11 November 2015 at 14:37, Alan Howard <alan@howard.net.nz> wrote:
Hi

I have to configure a Cisco 888EA router for a 10Mb HSNS SHDSL service from Chorus, which is not something I have tackled before.

Does anyone have a config example suitable for the Chorus service that they can share?�� I've been Googling for a config but can't find anything specific to Chorus.

Any assistance appreciated.

Alan.


_______________________________________________
NZNOG mailing list
NZNOG@list.waikato.ac.nz
http://list.waikato.ac.nz/mailman/listinfo/nznog