I have seen some older stuff only support half duplex, so you may not
have the duplex full command. Make sure you've got both ends set to the
same. I haven't had much luck with autonegotiate, and just tend to lock
everything down.
-----Original Message-----
From: Dan Clark [mailto:dan(a)scarfies.net]
Sent: Friday, 29 August 2003 10:33 a.m.
To: James Tyson
Cc: nznog(a)list.waikato.ac.nz
Subject: Re: [nznog] Cisco 1000 10BaseT Interface...
Thats a good point, does anyone have something more exciting lying
around? We might buy it off you if its resonable.
----- Original Message -----
From: "James Tyson"
I wonder if someone could tell me how to either hardset the unit to
full duplex or if it doesn't support full duplex operation
Try the "full-duplex" command.
Also try "duplex full", you know how they like to change the commands around, but most likely it won't do it.
Geez, a 1000 probably was made before anyone even thought of full-duplex ethernet :)
--- James Tyson Director, Giant Robot Ltd http://www.giantrobot.co.nz/
_______________________________________________ NZNOG mailing list NZNOG(a)list.waikato.ac.nz http://list.waikato.ac.nz/mailman/listinfo/nznog
_______________________________________________ NZNOG mailing list NZNOG(a)list.waikato.ac.nz http://list.waikato.ac.nz/mailman/listinfo/nznog ----------------------------------------------------------------------------------------------- Have you seen our website?.... http://www.vodafone.co.nz CAUTION: This correspondence is confidential and intended for the named recipient(s) only. If you are not the named recipient and receive this correspondence in error, you must not copy, distribute or take any action in reliance on it and you should delete it from your system and notify the sender immediately. Thank you. Unless otherwise stated, any views or opinions expressed are solely those of the author and do not represent those of Vodafone New Zealand Limited. Vodafone New Zealand Limited 21 Pitt Street, Private Bag 92161, Auckland, 1020, New Zealand Telephone + 64 9 357 5100 Facsimile + 64 9 377 0962