Hi
Check your auto-neg settings. I've experienced a few Chorus handovers where
you cannot have auto-neg enabled. You need to explicitly turn it off and
set the link to be 1000/F manually.
Is this a single or dual fibre handover?
Cheers
Dave
On Fri, Oct 10, 2014 at 2:39 PM, Alexander Neilson wrote: Hey Everyone We have just stood up our first Chorus UFB Handovers in Auckland and
Wellington and while the Mikrotik’s are showing the interfaces as running
Chorus are telling me their end is “operationally down”. I have tried changing all the settings I have on my end and they are still
reporting the same result. I have tried alternative optics, checked light levels with a meter, and
even had a Chorus tech out to take a look. Chorus originally pointed to the SFP+ being the issue, now they are saying
the config is wrong on my device and that they aren’t “seeing layer two”. I have asked them for any errors on the port or similar and they haven’t
reported any to me. I am a little stumped here and would appreciate the advice of anyone doing
either 1G or 10G HO Links for UFB with Chorus who could provide any input
or any idea of issues they have seen with the configs that would help me
diagnose this issue and resolve it. Thank you for your time. Regards
Alexander Alexander Neilson
Neilson Productions Limited alexander(a)neilson.net.nz
021 329 681
022 456 2326 _______________________________________________
NZNOG mailing list
NZNOG(a)list.waikato.ac.nz
http://list.waikato.ac.nz/mailman/listinfo/nznog