I use -
 
ts1-hn#sh fla
 
System flash directory:
File  Length   Name/status
  1   8900052  c5200-i-l.120-7.T.bin 
[8900116 bytes used, 7877100 available, 16777216 total]
16384K bytes of processor board System flash (Read ONLY)
 
ts1-hn#sh bootf
 
Boot flash directory:
File  Length   Name/status
  1   4631924  c5200-boot-l.120-7.bin 
  2   468984   mica-modem-pw.2.7.2.0.bin 
[5101036 bytes used, 3287572 available, 8388608 total]
8192K bytes of processor board Boot flash (Read/Write)
 
on several 5200's with good results.
-----Original Message-----
From: owner-nznog@list.waikato.ac.nz [mailto:owner-nznog@list.waikato.ac.nz]On Behalf Of Mendez Mart�n
Sent: Tuesday, 5 December 2000 9:13 a.m.
To: 'nznog@list.waikato.ac.nz'
Subject: problems with as5200

Hello, my name is Martin and i am new in the list.
I'm trying to put on an access server cisco as5200 with support 56kbps.
I probed three IOS version (11-3.9T, 11-3-9A and 12.0.1) with different modems (mica) firmwares (2.3.1.0, 2.6.2.0, 2.7.2.0) in differents combinations.

The as works fine one or two days, after thats it begin to give busy tone (it is connected to E1) and i need to restarted.

Some one could work fine with this servers ??. How ??. I need 56kpbs, callback and authenticate over a radius server, my configuration works fine, but the AS works horrible !

Thanks.-