Hey,

I've heard stories of Citylink having issues on wholesale'd Chorus DFAS circuits in the past where the splitter / LI / monitor circuit was bodged and caused too much attenuation resulting link problems...

Though I haven't ever experienced any issues on my Auckland DFAS circuits.

Would be interested to see some actual spec on this if someone can dig it up.



Cheers

Liam

On 4 December 2015 at 13:29, Tristram Cheer <t@uber.co.nz> wrote:

Hi All.

��

Does anyone here know what the LFC���s are doing for LI on dark fibre? I think most will be some kind of splitter but one LFC is talking about using a 50/50 split introducing 3db of loss into each leg and I���d like to get an idea of what the others are doing. Normally I���d look at the CFH tech specs but LI on DFAS came after them and there���s no reference in the agreements

��

��

��

Cheers J

��

��

TRISTRAM��CHEER
UBER GROUP LIMITED
NETWORK ARCHITECT - MOST PROBLEMS ARE THE RESULT OF PREVIOUS SOLUTIONS...

Facebook��Twitter

E: t@uber.co.nz
P: 09 438 5472 Ext 803 | M: 022 412 1985 | W: www.uber.co.nz
53 PORT ROAD | PO BOX 5083 | WHANGAREI | NEW ZEALAND

��

��


_______________________________________________
NZNOG mailing list
NZNOG@list.waikato.ac.nz
http://list.waikato.ac.nz/mailman/listinfo/nznog




--
Kind Regards


Liam Farr

Maxum Data
+64-9-950-5302