Yes Scott,
That is correct. The 0/110 PVC (with VLAN 10) is an Ethernet bridge and does not perform PPPoA->PPPoE (and vice versa for downstream) conversion - so shouldn’t be experiencing this issue.
If you are using PPP on the 0/110 PVC, then it works out to be PPPoEoA and the ISAM strips the ATM header - rather than straight PPPoA with the ISAM interworking function to convert to PPPoE, which is what occurs on the 0/100 PVC.
Thanks,
Brent
-----Original Message-----
From: Scott Pettit [mailto:SPettit(a)end2end.co.nz]
Sent: Tuesday, 27 January 2015 10:47 a.m.
To: Brent Marquis; Simon Allard
Cc: NZNOG
Subject: Re: [nznog] Chorus EUBA + IPV6
On 26/01/15 21:37, "Brent Marquis"
Only affect PPPoE->PPPoA translation This also means that IPv6 over VDSL (PTM) should be fine.
From: nznog-bounces(a)list.waikato.ac.nz [mailto:nznog-bounces(a)list.waikato.ac.nz] On Behalf Of Simon Allard To summarise: IPV6 doesn’t work on Chorus EUBA on some line card types Only affect PPPoE->PPPoA translation PPPoE end to end is fine. Chorus say IPV6 not supported on EUBA Customer numbers effected are smallish.
Just to clarify, if a customer uses PVC 0/110 (Ethernet), there is no issue, right? We have lots of sites on EUBA using 0/110 and haven’t had any problems with IPv6, ditto for WVS. -Scott -- [https://s3-ap-southeast-2.amazonaws.com/e2emailsig/unnamed.png] Scott Pettit | Director +64 9 9502222 | SPettit(a)end2end.co.nz End 2 End Limited +64 9 9502220 205/100 Parnell Road, Parnell, Auckland 1052, New Zealand http://www.end2end.co.nz The content of this message and any attachments may be privileged, confidential or sensitive and is intended only for the use of the intended recipient(s). Any unauthorised used is prohibited. Views expressed in this message are those of the individual sender, except where stated otherwise with appropriate authority. All pricing provided is valid at the time of writing only and due to factors such as the exchange rate, may change without notice. Sales are made subject to our Terms & Conditions, available on our website or on request. This communication, including any attachments, is confidential and may be legally privileged. If you are not the intended recipient, you should not read it - please contact me immediately, destroy it, and do not copy or use any part of this communication or disclose anything about it. Thank you. No confidentiality or privilege is waived or lost by any mis-transmission or error. Please note that this communication does not designate an information system for the purposes of the Electronic Transactions Act 2002.