A Juniper MX40 or MX80 seems to meet your needs there - depending on exact subscriber figures. From memory if every customer is in QinQ you won't be able to have more than 8000 on a MX80 series chassis due to interface limits.

Dave

On Wed, Nov 8, 2017 at 12:07 PM, Stan Rivett <stan@netspeed.net.nz> wrote:
Crikey, thanks for all the replies

Yes we need 10 Gbit, at least 3 ports and I'd rather not be too specific about numbers but more than a few thousand.

Apologies for being a bit of a cheap bugger but you know what its like as an SME, it all comes out of my pocket ;-)

Cheers

Stan Rivett
------------------
Netspeed
PO Box 5691
Dunedin
------------------

On 8 November 2017 at 11:14, Tim Price <tim@initech.co.nz> wrote:

Juniper MX5 + licensing shouldn���t cost you more than $30k depending on your Juniper partner status and where you buy it from.

��

From: <nznog-bounces@list.waikato.ac.nz> on behalf of Stan Rivett <stan@netspeed.net.nz>
Date: Wednesday, 8 November 2017 at 11:02 AM
To: nznog <NZNOG@list.waikato.ac.nz>
Subject: [nznog] BRAS Options

��

Hi all

��

The time has come to replace my poor old Cisco 7301 and the quote I got for an ASR1002-HX made my eyes water. Still waiting for a Juniper quote but the general discussion seemed like similar numbers.

��

Are there any other reliable options out there that don't cost more than my first house?

��

Cheers

��

Stan Rivett

------------------

Netspeed

PO Box 5691

Dunedin

------------------

_______________________________________________ NZNOG mailing list NZNOG@list.waikato.ac.nz https://list.waikato.ac.nz/mailman/listinfo/nznog



_______________________________________________
NZNOG mailing list
NZNOG@list.waikato.ac.nz
https://list.waikato.ac.nz/mailman/listinfo/nznog