Re: [nznog] Is there anyone on the list using mikrotik hardware to receive UFB Handovers from Chorus?

I have turned off autoneg I will be working with Mikrotik tonight to try get them involved to look under the hood. I am also going to try dig into some debug output to try find what is playing silly. I will dig into the command line as well and see what undocumented magic is inside. Regards Alexander Alexander Neilson Neilson Productions Ltd Alexander(a)Neilson.net.nz 021 329 681

On 10/10/2014, at 3:34 pm, mcfbbqroast . wrote:

You might need to do it via console? I've heard microtiks aren't completely feature filled in the GUI sense.

Have you tried looking around for information on manual neg 10g on mikrotik?

...

On 10 Oct 2014 15:30, "Alexander Neilson" wrote: This is a Dual Fibre 10G UFB Handover

I have my 1G Shared (EUBA, WVS, HSNS) Handover set to 1000/F and no auto neg so happy that it works like that.

I have tried this one both ways and its currently set to no auto neg (tho of course mikrotik doesn’t have a 10G radio button to check so they are all blank there)

Regards Alexander

Alexander Neilson Neilson Productions Limited

alexander(a)neilson.net.nz 021 329 681 022 456 2326

...

On 10/10/2014, at 3:10 pm, Dave Mill wrote:

Hi

Check your auto-neg settings. I've experienced a few Chorus handovers where you cannot have auto-neg enabled. You need to explicitly turn it off and set the link to be 1000/F manually.

Is this a single or dual fibre handover?

Cheers Dave

On Fri, Oct 10, 2014 at 2:39 PM, Alexander Neilson wrote: Hey Everyone

We have just stood up our first Chorus UFB Handovers in Auckland and Wellington and while the Mikrotik’s are showing the interfaces as running Chorus are telling me their end is “operationally down”.

I have tried changing all the settings I have on my end and they are still reporting the same result.

I have tried alternative optics, checked light levels with a meter, and even had a Chorus tech out to take a look.

Chorus originally pointed to the SFP+ being the issue, now they are saying the config is wrong on my device and that they aren’t “seeing layer two”.

I have asked them for any errors on the port or similar and they haven’t reported any to me.

I am a little stumped here and would appreciate the advice of anyone doing either 1G or 10G HO Links for UFB with Chorus who could provide any input or any idea of issues they have seen with the configs that would help me diagnose this issue and resolve it.

Thank you for your time.

Regards Alexander

Alexander Neilson Neilson Productions Limited

alexander(a)neilson.net.nz 021 329 681 022 456 2326

_______________________________________________ NZNOG mailing list NZNOG(a)list.waikato.ac.nz http://list.waikato.ac.nz/mailman/listinfo/nznog

_______________________________________________ NZNOG mailing list NZNOG(a)list.waikato.ac.nz http://list.waikato.ac.nz/mailman/listinfo/nznog

---

NZNOG mailing list NZNOG(a)list.waikato.ac.nz http://list.waikato.ac.nz/mailman/listinfo/nznog