We've moved to 764k v4 and 64k v6 on our two 'problem' routers.
Again, a reboot was required to change the CAM around.
Cheers
Dave
On Thu, Aug 14, 2014 at 5:56 AM, Paul Gear
On 13/08/14 13:38, Dave Mill wrote:
Hi all
Just as a bit of a heads-up in case anyone else is hitting this issue (and not aware).
We tend to be learning a total of about 511k or so unique IPv4 routes nowadays from external peers. Combine this with various internal routes and the actual number of IPv4 routes on a couple of our border routers is a few short of 512k.
If any of these routers have a RIB or FIB limit of 512k IPv4 routes then expect some strange issues.
Like random routes not showing up in your routing table..
*cough* brocade xmr default cam partition *cough*
Saw this on a Cisco 7604 + RSP720 3CXL, which have the same default TCAM partition settings. The overall limit is 1M IPv4 or 512K IPv6 (don't try anything smaller than a /64 at home, kids!), but the default is 50% to each, and it requires a reboot to fix. Fun times.
Paul
_______________________________________________ NZNOG mailing list NZNOG(a)list.waikato.ac.nz http://list.waikato.ac.nz/mailman/listinfo/nznog