spark sip trunk config on a cisco isr/cube
Hi Folks, Does anyone have a reference config for Cisco CUBE for connecting to Spark's SIP trunk service? Assume I am missing something simple here as incoming working fine but outgoing gets 404s. Cheers, Blair
Off the top of my head, try putting the number as 91234567 - also your caller id has to be valid depending on trunk settings Otherwise, ask spark- Cisco is an officially supported config (from memory) HTH! Sent from my iPhone
On 4/03/2020, at 18:40, Blair Harrison <nznog(a)jedi.school.nz> wrote:
Hi Folks,
Does anyone have a reference config for Cisco CUBE for connecting to Spark's SIP trunk service? Assume I am missing something simple here as incoming working fine but outgoing gets 404s.
Cheers, Blair
_______________________________________________ NZNOG mailing list -- nznog(a)list.waikato.ac.nz To unsubscribe send an email to nznog-leave(a)list.waikato.ac.nz
fwiw I did manage to get this going eventually, just posting solution here for future reference. there is some magic required in the Contact header to include the tgrp parameter (generally your pilot number - 91234567 as an example) something like this voice class sip-profiles 100 rule 110 request INVITE sip-header Contact modify "@" ";tgrp=91234567;trunk-context=spark.co.nz@" cheers, Blair On Wed, Mar 4, 2020 at 4:56 PM Blair Harrison <nznog(a)jedi.school.nz> wrote:
Hi Folks,
Does anyone have a reference config for Cisco CUBE for connecting to Spark's SIP trunk service? Assume I am missing something simple here as incoming working fine but outgoing gets 404s.
Cheers, Blair
participants (2)
-
Blair Harrison -
Pieter De Wit