Hi all, I am having trouble with getting a PPPoE session to use a local ip pool via an AVPair. I am sending the following avpairs to the session from Radius (we're using Smile): lcp:allow-subinterface=yes ip:vrf-id=TESTVRF ip:addr-pool=TESTPOOL ip:ip-unnumbered=Loopback212 On the router: ip local pool TESTPOOL 100.64.8.1 100.64.15.254 The attributes are being received in the debug, and the session is ending up in the correct VRF, but there is no IP address being assigned on the local LNS. Router#show users ... Interface User Mode Idle Peer Address Vi2.1 testuser(a)test.com PPPoE - Router#show vrf ... Name Default RD Protocols Interfaces TESTVRF 65000:305 ipv4 Lo305 Vi2.1 ... Any help to figure out what is going on would be very much appreciated. Cisco IOS Software, ASR1000 Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 15.4(1)S, RELEASE SOFTWARE (fc2) ...Skeeve *Skeeve Stevens - *eintellego Networks Pty Ltd skeeve(a)eintellegonetworks.co.nz ; www.eintellegonetworks.co.nz Phone: +612 8014 7398; Cell +61 (0)414 753 383 ; skype://skeeve facebook.com/eintellegonetworks ; http://twitter.com/networkceoau linkedin.com/in/skeeve twitter.com/theispguy ; blog: www.theispguy.com The Experts Who The Experts Call Juniper - Cisco - Cloud - Consulting - IPv4 Brokering