
Absolutely, I hadn't realised the responses to me weren't to the list as well. The relevant bits of the config for the CIsco 888EA were: controller SHDSL 0 mode efm dsl-group 0 pairs 0,1,2,4 efm-bond ! interface Ethernet0 ip address x.x.x.x x.x.x.x no ip redirects no ip unreachables no ip proxy-arp no shut Hopefully this is useful for someone in the future. Cheers Alan. On 20 November 2015 at 10:48, Dave Mill <davemill(a)gmail.com> wrote:
Feel like sharing a config with the list? Will help the next person who's in the same situation a great deal.
Cheers Dave
On Fri, Nov 20, 2015 at 10:45 AM, Alan Howard <alan(a)howard.net.nz> wrote:
Much appreciation to everyone who replied, with your assistance I've got the router configured.
Thanks Alan.
On 11 November 2015 at 14:37, Alan Howard <alan(a)howard.net.nz> wrote:
Hi
I have to configure a Cisco 888EA router for a 10Mb HSNS SHDSL service from Chorus, which is not something I have tackled before.
Does anyone have a config example suitable for the Chorus service that they can share? I've been Googling for a config but can't find anything specific to Chorus.
Any assistance appreciated.
Alan.
_______________________________________________ NZNOG mailing list NZNOG(a)list.waikato.ac.nz http://list.waikato.ac.nz/mailman/listinfo/nznog