Hello, my name is Martin and i am new in the list. I'm trying to put on an access server cisco as5200 with support 56kbps. I probed three IOS version (11-3.9T, 11-3-9A and 12.0.1) with different modems (mica) firmwares (2.3.1.0, 2.6.2.0, 2.7.2.0) in differents combinations. The as works fine one or two days, after thats it begin to give busy tone (it is connected to E1) and i need to restarted. Some one could work fine with this servers ??. How ??. I need 56kpbs, callback and authenticate over a radius server, my configuration works fine, but the AS works horrible ! Thanks.-
I'm trying to put on an access server cisco as5200 with support 56kbps. I probed three IOS version (11-3.9T, 11-3-9A and 12.0.1) with different modems (mica) firmwares (2.3.1.0, 2.6.2.0, 2.7.2.0) in differents combinations.
1) you do realise this is a _New Zealand_ Network operators group right?
but the AS works horrible !
2) you've hit the nail on the head. Ditch the crappy Cisco dial in servers and get some Lucent gear (A Max6000 should do what you want). Cisco should stick to routers. Chris Rigby Senior Systems Engineer IHUG - Into the Internet --------- To unsubscribe from nznog, send email to majordomo(a)list.waikato.ac.nz where the body of your message reads: unsubscribe nznog
I use entirely Cisco access servers with excellent results. -----Original Message----- From: owner-nznog(a)list.waikato.ac.nz [mailto:owner-nznog(a)list.waikato.ac.nz]On Behalf Of Chris Rigby Sent: Tuesday, 5 December 2000 9:24 a.m. To: Mendez Martin Cc: 'nznog(a)list.waikato.ac.nz' Subject: Re: problems with as5200
I'm trying to put on an access server cisco as5200 with support 56kbps. I probed three IOS version (11-3.9T, 11-3-9A and 12.0.1) with different modems (mica) firmwares (2.3.1.0, 2.6.2.0, 2.7.2.0) in differents combinations.
1) you do realise this is a _New Zealand_ Network operators group right?
but the AS works horrible !
2) you've hit the nail on the head. Ditch the crappy Cisco dial in servers and get some Lucent gear (A Max6000 should do what you want). Cisco should stick to routers. Chris Rigby Senior Systems Engineer IHUG - Into the Internet --------- To unsubscribe from nznog, send email to majordomo(a)list.waikato.ac.nz where the body of your message reads: unsubscribe nznog --------- To unsubscribe from nznog, send email to majordomo(a)list.waikato.ac.nz where the body of your message reads: unsubscribe nznog
problems with as5200I use - ts1-hn#sh fla System flash directory: File Length Name/status 1 8900052 c5200-i-l.120-7.T.bin [8900116 bytes used, 7877100 available, 16777216 total] 16384K bytes of processor board System flash (Read ONLY) ts1-hn#sh bootf Boot flash directory: File Length Name/status 1 4631924 c5200-boot-l.120-7.bin 2 468984 mica-modem-pw.2.7.2.0.bin [5101036 bytes used, 3287572 available, 8388608 total] 8192K bytes of processor board Boot flash (Read/Write) on several 5200's with good results. -----Original Message----- From: owner-nznog(a)list.waikato.ac.nz [mailto:owner-nznog(a)list.waikato.ac.nz]On Behalf Of Mendez Martín Sent: Tuesday, 5 December 2000 9:13 a.m. To: 'nznog(a)list.waikato.ac.nz' Subject: problems with as5200 Hello, my name is Martin and i am new in the list. I'm trying to put on an access server cisco as5200 with support 56kbps. I probed three IOS version (11-3.9T, 11-3-9A and 12.0.1) with different modems (mica) firmwares (2.3.1.0, 2.6.2.0, 2.7.2.0) in differents combinations. The as works fine one or two days, after thats it begin to give busy tone (it is connected to E1) and i need to restarted. Some one could work fine with this servers ??. How ??. I need 56kpbs, callback and authenticate over a radius server, my configuration works fine, but the AS works horrible ! Thanks.-
participants (3)
-
Chris Rigby -
Mendez Martín -
Tony Wicks