I'm sure someone will regard this as commercial so apologies to those people already, but this is to exciting to not tell everyone. As of 12.2(50)SE Cisco have now moved basic IPv6 support on the following switches into the base image: 3750-E 3560-E 3750 3560 This reduces the cost of moving to IPv6 substantially, as previsouly you had to buy the very expensive "Advanced IP" image. Once you have one of these images on the kit you need to execute "sdm prefer dual-ipv4-and-ipv6 ..." AND reboot the device. ________________________________ [cid:image001.png(a)01C9EF14.CAF889C0]
This is also the case with ME3400's and ME3400E's. From: nznog-bounces(a)list.waikato.ac.nz [mailto:nznog-bounces(a)list.waikato.ac.nz] On Behalf Of Philip D'Ath Sent: Wednesday, 17 June 2009 11:50 a.m. To: ipv6-techsig(a)listserver.internetnz.net.nz; nznog(a)list.waikato.ac.nz Subject: [nznog] FW: IP Base & IP Services I'm sure someone will regard this as commercial so apologies to those people already, but this is to exciting to not tell everyone. As of 12.2(50)SE Cisco have now moved basic IPv6 support on the following switches into the base image: 3750-E 3560-E 3750 3560 This reduces the cost of moving to IPv6 substantially, as previsouly you had to buy the very expensive "Advanced IP" image. Once you have one of these images on the kit you need to execute "sdm prefer dual-ipv4-and-ipv6 ..." AND reboot the device. ________________________________ [cid:image001.png(a)01C9EF46.960A33D0]
participants (2)
-
Bill Walker -
Philip D'Ath