Cisco ASR/LNS+VRF+Local Pool issue
Hi all, I am having trouble with getting a PPPoE session to use a local ip pool via an AVPair. I am sending the following avpairs to the session from Radius (we're using Smile): lcp:allow-subinterface=yes ip:vrf-id=TESTVRF ip:addr-pool=TESTPOOL ip:ip-unnumbered=Loopback212 On the router: ip local pool TESTPOOL 100.64.8.1 100.64.15.254 The attributes are being received in the debug, and the session is ending up in the correct VRF, but there is no IP address being assigned on the local LNS. Router#show users ... Interface User Mode Idle Peer Address Vi2.1 testuser(a)test.com PPPoE - Router#show vrf ... Name Default RD Protocols Interfaces TESTVRF 65000:305 ipv4 Lo305 Vi2.1 ... Any help to figure out what is going on would be very much appreciated. Cisco IOS Software, ASR1000 Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 15.4(1)S, RELEASE SOFTWARE (fc2) ...Skeeve *Skeeve Stevens - *eintellego Networks Pty Ltd skeeve(a)eintellegonetworks.co.nz ; www.eintellegonetworks.co.nz Phone: +612 8014 7398; Cell +61 (0)414 753 383 ; skype://skeeve facebook.com/eintellegonetworks ; http://twitter.com/networkceoau linkedin.com/in/skeeve twitter.com/theispguy ; blog: www.theispguy.com The Experts Who The Experts Call Juniper - Cisco - Cloud - Consulting - IPv4 Brokering
For those not subscribed to AusNOG, Skeeve has solved his issue! On Wed, Sep 17, 2014 at 12:37 PM, Skeeve Stevens < skeeve+ausnog(a)eintellegonetworks.com> wrote:
OK all.. it was a PEBKAC issue... it was the loopback being wrong... and when I was re-resting I had removed the pool from the avpairs for testing.
It is fine now... damnit...
I need a holiday... off to Brisbane to APNIC I go.
...Skeeve
On Wed, Sep 17, 2014 at 11:36 AM, Skeeve Stevens < skeeve(a)eintellegonetworks.co.nz> wrote:
Hi all,
I am having trouble with getting a PPPoE session to use a local ip pool via an AVPair.
I am sending the following avpairs to the session from Radius (we're using Smile):
lcp:allow-subinterface=yes ip:vrf-id=TESTVRF ip:addr-pool=TESTPOOL ip:ip-unnumbered=Loopback212
On the router:
ip local pool TESTPOOL 100.64.8.1 100.64.15.254
The attributes are being received in the debug, and the session is ending up in the correct VRF, but there is no IP address being assigned on the local LNS.
Router#show users ... Interface User Mode Idle Peer Address Vi2.1 testuser(a)test.com PPPoE -
Router#show vrf ... Name Default RD Protocols Interfaces TESTVRF 65000:305 ipv4 Lo305 Vi2.1 ...
Any help to figure out what is going on would be very much appreciated.
Cisco IOS Software, ASR1000 Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 15.4(1)S, RELEASE SOFTWARE (fc2)
...Skeeve
*Skeeve Stevens - *eintellego Networks Pty Ltd skeeve(a)eintellegonetworks.co.nz ; www.eintellegonetworks.co.nz
Phone: +612 8014 7398; Cell +61 (0)414 753 383 ; skype://skeeve
facebook.com/eintellegonetworks ; http://twitter.com/networkceoau linkedin.com/in/skeeve
twitter.com/theispguy ; blog: www.theispguy.com
The Experts Who The Experts Call Juniper - Cisco - Cloud - Consulting - IPv4 Brokering
_______________________________________________ NZNOG mailing list NZNOG(a)list.waikato.ac.nz http://list.waikato.ac.nz/mailman/listinfo/nznog
Damn, sorry about that!
...Skeeve
*Skeeve Stevens - *eintellego Networks Pty Ltd
skeeve(a)eintellegonetworks.co.nz ; www.eintellegonetworks.co.nz
Phone: +612 8014 7398; Cell +61 (0)414 753 383 ; skype://skeeve
facebook.com/eintellegonetworks ; http://twitter.com/networkceoau
linkedin.com/in/skeeve
twitter.com/theispguy ; blog: www.theispguy.com
The Experts Who The Experts Call
Juniper - Cisco - Cloud - Consulting - IPv4 Brokering
On 17 September 2014 12:25, Steve Kurzeja
For those not subscribed to AusNOG, Skeeve has solved his issue!
On Wed, Sep 17, 2014 at 12:37 PM, Skeeve Stevens < skeeve+ausnog(a)eintellegonetworks.com> wrote:
OK all.. it was a PEBKAC issue... it was the loopback being wrong... and when I was re-resting I had removed the pool from the avpairs for testing.
It is fine now... damnit...
I need a holiday... off to Brisbane to APNIC I go.
...Skeeve
On Wed, Sep 17, 2014 at 11:36 AM, Skeeve Stevens < skeeve(a)eintellegonetworks.co.nz> wrote:
Hi all,
I am having trouble with getting a PPPoE session to use a local ip pool via an AVPair.
I am sending the following avpairs to the session from Radius (we're using Smile):
lcp:allow-subinterface=yes ip:vrf-id=TESTVRF ip:addr-pool=TESTPOOL ip:ip-unnumbered=Loopback212
On the router:
ip local pool TESTPOOL 100.64.8.1 100.64.15.254
The attributes are being received in the debug, and the session is ending up in the correct VRF, but there is no IP address being assigned on the local LNS.
Router#show users ... Interface User Mode Idle Peer Address Vi2.1 testuser(a)test.com PPPoE -
Router#show vrf ... Name Default RD Protocols Interfaces TESTVRF 65000:305 ipv4 Lo305 Vi2.1 ...
Any help to figure out what is going on would be very much appreciated.
Cisco IOS Software, ASR1000 Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 15.4(1)S, RELEASE SOFTWARE (fc2)
...Skeeve
*Skeeve Stevens - *eintellego Networks Pty Ltd skeeve(a)eintellegonetworks.co.nz ; www.eintellegonetworks.co.nz
Phone: +612 8014 7398; Cell +61 (0)414 753 383 ; skype://skeeve
facebook.com/eintellegonetworks ; http://twitter.com/networkceoau linkedin.com/in/skeeve
twitter.com/theispguy ; blog: www.theispguy.com
The Experts Who The Experts Call Juniper - Cisco - Cloud - Consulting - IPv4 Brokering
_______________________________________________ NZNOG mailing list NZNOG(a)list.waikato.ac.nz http://list.waikato.ac.nz/mailman/listinfo/nznog
_______________________________________________ NZNOG mailing list NZNOG(a)list.waikato.ac.nz http://list.waikato.ac.nz/mailman/listinfo/nznog
participants (2)
-
Skeeve Stevens -
Steve Kurzeja