- NZNOG - lists.nznog.org

Contents of a platinum spamware CD obtained.
by Alan Brown 08 Dec '00

08 Dec '00

After larting the hell out of the hwhclub.com spammers (Hamilton, wave source, webfarm site), I managed to obtain the software they used. Platinum has a list of 23 million addresses in it, with lots of duplication. If any local admins are interested in checking what addresses of theirs are on the CD, please contact me. As a FWIW, there are a shitload of Xtra(299), Clear(131), Voyager(202), Actrix(472), Iconz(442) and Ihug(691) addresses. If they're anything like the manawatu list (182 addresses), only 1-2% actually work and the rest could easily be pressed into service as spamtraps. Many of the manawatu addresses were cancelled because of spam levels and almost all of them were scraped from usenet postings. Surprisingly, few addresses at newer NZ ISPs (less than 2 years old) seem to be listed... AB --------- To unsubscribe from nznog, send email to majordomo(a)list.waikato.ac.nz where the body of your message reads: unsubscribe nznog

1 0

Best IOS for IPSEC on Cisco 4000?
by Simon Blake 06 Dec '00

06 Dec '00

Hey folks The lovely chaps at Logical have lent me a couple of 4000's for the SAGE IPSEC bakeoff this weekend. So, at the risk of being mocked for my naivete, can somebody recommend a passable IOS for 3DES IPSEC to Win2K and *nix connectivity? Unfortunately, I haven't sparked the boxes up yet to find out how much RAM they have, but I reckon I can pillage enough from both to get enough in one. And of course, anybody near Citylink in Wellington on Sunday is most welcome to haul buy and join in the fun. People with exotic hardware/software (that is other than FreeS/WAN and Win2K) especially welcome. Cheers Si --------- To unsubscribe from nznog, send email to majordomo(a)list.waikato.ac.nz where the body of your message reads: unsubscribe nznog

2 1

Last call...
by James Tyson 05 Dec '00

05 Dec '00

Anyone else that wants to peer with Attica please email me the following details. Peering Point (APE/WIX) Your Interface IP Your Prefix List Here's my details: APE: 192.203.154.46 WIX: 202.7.1.161 James Tyson --- Samizdat New Media Solutions --------- To unsubscribe from nznog, send email to majordomo(a)list.waikato.ac.nz where the body of your message reads: unsubscribe nznog

1 0

RE: problems with as5200
by Mendez Martín 04 Dec '00

04 Dec '00

Yes, Cisco IOS has an option to define argentinian signialing as the country to use and i defined it in my configuration. thanks. > -----Mensaje original----- > De: Chris Rigby [SMTP:chris.r(a)staff.ihug.co.nz] > Enviado el: Lunes 4 de Diciembre de 2000 5:51 PM > Para: Mendez Martín > CC: nznog(a)list.waikato.ac.nz > Asunto: RE: problems with as5200 > > > It is extange, Cisco has say that this is not is a hardware problem, > anyway, > > i couldn't put operating this server, some one say me that may be it is > a > > particular problems of this aserver with signialling with the E1 (r2 > > signialling in Argentina). of my country. > > Anyway, thanks for your comments. > > Well I do know for a fact that r2 signaling in argentina is slightly > different than the standard. Lucent have even gone so far as to add the > "argentinian" signaling type as an option in their maxes and tnt's so it > must be enough different to warrant this. > > If it keeps going to sleep then it most likely is an issue like this. Have > you checked ciscos site to see if they have an "argentinian" option like > the maxes? > > Chris Rigby > Senior Systems Engineer > IHUG - Into the Internet

1 0

APE & WIX Peering
by James Tyson 04 Dec '00

04 Dec '00

Anyone wishing to peer with Attica over APE and WIX please call or email me before 5pm tonight. ip prefix-list attica-networks description Attica Communications Ltd, contact: james.tyson(a)attica.co.nz ip prefix-list attica-networks permit 202.180.96.0/19 ip prefix-list attica-networks permit 202.180.64.0/18 le 19 Cheers. James Tyson james.tyson(a)attica.co.nz +64-21-837-867 --------- To unsubscribe from nznog, send email to majordomo(a)list.waikato.ac.nz where the body of your message reads: unsubscribe nznog

1 0

RE: problems with as5200
by Scott, Arron 04 Dec '00

04 Dec '00

Thanks for your opinion Chris, however Cisco, the number 1 manufacturer of dial servers in the world would be happy to give Martin a hand to sort this out ;-) ps. We make more switches than routers now. Arron Scott Systems Engineer Cisco -----Original Message----- From: owner-nznog(a)list.waikato.ac.nz [mailto:owner-nznog(a)list.waikato.ac.nz]On Behalf Of Chris Rigby Sent: Monday, 4 December 2000 12:24 p.m. To: Mendez Martin Cc: 'nznog(a)list.waikato.ac.nz' Subject: Re: problems with as5200 > I'm trying to put on an access server cisco as5200 with support 56kbps. > I probed three IOS version (11-3.9T, 11-3-9A and 12.0.1) with different > modems (mica) firmwares (2.3.1.0, 2.6.2.0, 2.7.2.0) in differents > combinations. 1) you do realise this is a _New Zealand_ Network operators group right? > but the AS works horrible ! 2) you've hit the nail on the head. Ditch the crappy Cisco dial in servers and get some Lucent gear (A Max6000 should do what you want). Cisco should stick to routers. Chris Rigby Senior Systems Engineer IHUG - Into the Internet --------- To unsubscribe from nznog, send email to majordomo(a)list.waikato.ac.nz where the body of your message reads: unsubscribe nznog --------- To unsubscribe from nznog, send email to majordomo(a)list.waikato.ac.nz where the body of your message reads: unsubscribe nznog

3 2

RE: problems with as5200
by Mendez Martín 04 Dec '00

04 Dec '00

I hope this, but Cisco only say: probe this version, and after that say probe this another and so on. It appear like the Cisco engineer (TAC) don´t know really what is happend here. Thanks! > -----Mensaje original----- > De: Scott, Arron [SMTP:ascott(a)cisco.com] > Enviado el: Lunes 4 de Diciembre de 2000 5:57 PM > Para: Chris Rigby; Mendez Martin > CC: 'nznog(a)list.waikato.ac.nz' > Asunto: RE: problems with as5200 > > Thanks for your opinion Chris, however Cisco, the number 1 manufacturer > of dial servers in the world would be happy to give Martin a hand to > sort this out ;-) > > ps. We make more switches than routers now. > > Arron Scott > Systems Engineer > Cisco > > -----Original Message----- > From: owner-nznog(a)list.waikato.ac.nz > [mailto:owner-nznog(a)list.waikato.ac.nz]On Behalf Of Chris Rigby > Sent: Monday, 4 December 2000 12:24 p.m. > To: Mendez Martin > Cc: 'nznog(a)list.waikato.ac.nz' > Subject: Re: problems with as5200 > > > > I'm trying to put on an access server cisco as5200 with support > 56kbps. > > I probed three IOS version (11-3.9T, 11-3-9A and 12.0.1) with > different > > modems (mica) firmwares (2.3.1.0, 2.6.2.0, 2.7.2.0) in differents > > combinations. > > 1) you do realise this is a _New Zealand_ Network operators group right? > > > but the AS works horrible ! > > 2) you've hit the nail on the head. Ditch the crappy Cisco dial in > servers > and get some Lucent gear (A Max6000 should do what you want). Cisco > should > stick to routers. > > Chris Rigby > Senior Systems Engineer > IHUG - Into the Internet > > --------- > To unsubscribe from nznog, send email to majordomo(a)list.waikato.ac.nz > where the body of your message reads: > unsubscribe nznog

1 0

RE: problems with as5200
by Mendez Martín 04 Dec '00

04 Dec '00

It is extange, Cisco has say that this is not is a hardware problem, anyway, i couldn't put operating this server, some one say me that may be it is a particular problems of this aserver with signialling with the E1 (r2 signialling in Argentina). of my country. Anyway, thanks for your comments. Martín Méndez Teconología - PECOM Energia. Voice:+54-11-4344-6000 Int. 3103 mmendezb(a)pecom.com.ar > -----Mensaje original----- > De: Tony Wicks [SMTP:tony.wicks(a)nz.asiaonline.net] > Enviado el: Lunes 4 de Diciembre de 2000 5:29 PM > Para: nznog(a)list.waikato.ac.nz > Asunto: RE: problems with as5200 > > I use entirely Cisco access servers with excellent results. > > -----Original Message----- > From: owner-nznog(a)list.waikato.ac.nz > [mailto:owner-nznog(a)list.waikato.ac.nz]On Behalf Of Chris Rigby > Sent: Tuesday, 5 December 2000 9:24 a.m. > To: Mendez Martin > Cc: 'nznog(a)list.waikato.ac.nz' > Subject: Re: problems with as5200 > > > > I'm trying to put on an access server cisco as5200 with support 56kbps. > > I probed three IOS version (11-3.9T, 11-3-9A and 12.0.1) with different > > modems (mica) firmwares (2.3.1.0, 2.6.2.0, 2.7.2.0) in differents > > combinations. > > 1) you do realise this is a _New Zealand_ Network operators group right? > > > but the AS works horrible ! > > 2) you've hit the nail on the head. Ditch the crappy Cisco dial in servers > and get some Lucent gear (A Max6000 should do what you want). Cisco should > stick to routers. > > Chris Rigby > Senior Systems Engineer > IHUG - Into the Internet > > --------- > To unsubscribe from nznog, send email to majordomo(a)list.waikato.ac.nz > where the body of your message reads: > unsubscribe nznog > > --------- > To unsubscribe from nznog, send email to majordomo(a)list.waikato.ac.nz > where the body of your message reads: > unsubscribe nznog

2 1

RE: problems with as5200
by Mendez Martín 04 Dec '00

04 Dec '00

I know that this list is in NZ. Could i send email anyway ?? I am from Argentina in south america. I am thinking seriously in put a Lucent access server. Thanks ! > -----Mensaje original----- > De: Chris Rigby [SMTP:chris.r(a)staff.ihug.co.nz] > Enviado el: Lunes 4 de Diciembre de 2000 5:24 PM > Para: Mendez Martín > CC: 'nznog(a)list.waikato.ac.nz' > Asunto: Re: problems with as5200 > > > I'm trying to put on an access server cisco as5200 with support 56kbps. > > I probed three IOS version (11-3.9T, 11-3-9A and 12.0.1) with different > > modems (mica) firmwares (2.3.1.0, 2.6.2.0, 2.7.2.0) in differents > > combinations. > > 1) you do realise this is a _New Zealand_ Network operators group right? > > > but the AS works horrible ! > > 2) you've hit the nail on the head. Ditch the crappy Cisco dial in servers > and get some Lucent gear (A Max6000 should do what you want). Cisco should > stick to routers. > > Chris Rigby > Senior Systems Engineer > IHUG - Into the Internet

1 0

problems with as5200
by Mendez Martín 04 Dec '00

04 Dec '00

Hello, my name is Martin and i am new in the list. I'm trying to put on an access server cisco as5200 with support 56kbps. I probed three IOS version (11-3.9T, 11-3-9A and 12.0.1) with different modems (mica) firmwares (2.3.1.0, 2.6.2.0, 2.7.2.0) in differents combinations. The as works fine one or two days, after thats it begin to give busy tone (it is connected to E1) and i need to restarted. Some one could work fine with this servers ??. How ??. I need 56kpbs, callback and authenticate over a radius server, my configuration works fine, but the AS works horrible ! Thanks.-

3 3